|
Post by mikado on Dec 3, 2014 7:16:05 GMT
Hi, I am completely new to this site, new to DCC come to that but I do have a hornby DCC ready train set for my grandchildren (and me) to "play with" However I need a couple of accessory decoders to drive Peco point motors and I have read on the forum that you have a DIY kit available. Please can someone point me to the info for the kit and also to the way to assemble and test it. Many thanks Mikado
|
|
|
Post by Paul Harman on Dec 3, 2014 18:06:13 GMT
Hi Mikado The details of the DIY accessory decoder are at www.dccdiy.org.uk/accessory.html and you can go to the sales page to see how to buy a kit. It is based on the function decoder so you should look at the manual for building the function decoder first. Any additional information that you might need should be either in the downloads section or posted on here. You need to note that there is an error on the cutting guide for the stripboard so use the overlay diagram instead to work out where to cut the stripboard.
|
|